Normes de préparation de surface
Normes de préparation de surface
Surface Preparation Standards for Abrasive Blasting
Surface preparation standards define the cleanliness level contractors must achieve before they apply protective coatings during abrasive blasting.
Industrial blasting projects usually follow internationally recognized guidelines such as OIN 8501-1 and SSPC standards. These guidelines help contractors maintain consistent coating performance and improve long-term corrosion protection.
Why Surface Preparation Matters
Proper surface preparation directly affects coating durability and corrosion resistance.
When operators skip proper cleaning before coating, rust, échelle, and old coatings can weaken adhesion strength. Par conséquent, coatings may fail earlier and increase maintenance costs.
In many industrial projects, abrasive blasting helps contractors prepare steel structures used in shipbuilding, pipelines, réservoirs, and infrastructure.
Common Surface Preparation Grades
Industrial blasting projects commonly use the following cleanliness grades:
Sa 1 – Light Blast Cleaning
Operators remove loose rust, échelle de moulin, and surface contaminants.
Sa 2 – Thorough Blast Cleaning
Blasting removes most rust, échelle, and coatings while leaving only slight stains.
Sa 2.5 – Near-White Metal Blast Cleaning
Operators remove almost all rust, échelle, and coatings from the steel surface.
Sa 3 – White Metal Blast Cleaning
Blasting produces a completely clean steel surface with no visible contamination.
These standards define the cleanliness level required before contractors apply protective coatings.
Surface Profile and Abrasive Selection
Besides cleanliness, abrasive blasting must also create the correct surface profile.
Angular abrasives such as copper slag blasting media generate sharp surface patterns that improve coating adhesion. For this reason, many contractors choose copper slag abrasives for industrial surface preparation projects.
Consistent abrasive grading also helps contractors maintain stable blasting results across large steel structures.
Practical Use in Industrial Projects
Industries commonly apply surface preparation standards in the following projects:
• Shipbuilding and ship repair
• Steel fabrication and construction
• Oil & gas tanks and pipelines
• Industrial maintenance projects
Contractors follow these blasting standards to achieve reliable coating durability and long-term corrosion protection.
Need more information about copper slag blasting standards or abrasive selection?
Contact our team for technical support, blasting media recommendations, and supply details.
Scannez le code QR avec WeChat
WeChat
Scannez le QR Code avec WeChat